PFI Parts - Spare Parts for SMT Machines and Consumables
Cart 0
MyData Parts
Fuji Parts
Samsung Parts
Siemens Parts
Speedline Parts
Universal Instruments Parts
Panasonic Parts
DEK Parts
Assembleon Parts
1631D - HP  parts (786) 681-7852 / www.pfipartsus.com

HP

HP 1631D Logic Analyzers

$ 100.00

This product may have a 20% restock fee

  • USED and Tested
  • Built-in two-channel digitizing oscilloscope-50 MHz bandwidth and 200 megasample/second digitizing rate
  • Up to 43 state channels and 16 timing channels
  • System performance analysis for global view of system activity
  • Interactive measurements
  • Automatic time-interval measurements

HP 1631A/D provides a digitizing oscilloscope and a logic analyzer in one low-cost instrument.  It offers analog, timing, state, and system performance analysis capabilities function separately or interactively to serve the needs of digital design and test engineers.

The A and D models differ only in state/timing channel width.  The HP 1631A provides up to 35 state channels, eight timing channels, and two analog channels.  The HP 1631D provides up to 43 state channels, 16 timing channels, and two analog channels.

The One Tool For Every Phase Of Digital Design And Test

A 50 MHz digitizing oscilloscope

  • 200 megasample/second digitizing rate for capturing single-shot waveforms
  • Two simultaneous channels
  • Signal-shot time intervals to ± 1.5 ns

A complete logic analyzer

  • 100 MHz timing analyzer
  • Time-interval accuracy to ± 1.5 ns
  • 25 MHz state analyzer
    Performance analysis for a global view of the system

Interactive measurements

  • Arming and triggering with timing correlation
  • Sophisticated triggering features
  • Automatic time-interval measurements

Analog Waveform Analysis

Analog waveform analysis provides simultaneous display of up to two channels User-definable labels, wide magnification range, and direct readout of time and voltage between cursors are available.

State Analysis

State listings and waveforms provide displays and windowing of address, data, status, and control line activity.  Selectable display modes include binary, octal, decimal, hexadecimal, ASCII, relocation, user-defined mnemonics, and microprocessor-specific mnemonics.   You can assign labels, and display and/or trigger on code in terms of relocatable or absolute addresses, or mnemonics.

Timing Analysis

Timing waveform diagrams provide simultaneous display of up to 16 channels, with user-definable labels.  Wide magnification range, glitch display, and direct readout of time between cursors are available.

System Performance Analysis

Time interval and event histograms let you view system hardware/software activity or specific modules for performance evaluation.  Out-of-spec conditions or bottlenecks in program flow or hardware execution stand out.  In addition, the display shows measurement data, including the minimum, maximum, average value, and total measurement time.

Interactive: State and Analog

Full state analyzer indexing can arm analog waveform acquisition. Full analog triggering can arm state data acquisition.

Interactive: State and Timing

Full state analyzer indexing can arm timing waveform acquisition. Full timing analyzer indexing can arm state data acquisitions.

Analog Post-processing

Automatic time-interval measurements are provided through analog X and O cursors, with statistical calculations to enhance accuracy.  A search-and-then-stop mode stops waveform acquisition when user-definable trigger conditions are met.

Timing Post-processing

Automatic time-interval measurements are provided through timing X and O cursors, with statistical calculations to enhance accuracy.  A search-and-then-stop mode stops timng data acquisitions when user-definable trigger conditions are met.

Inverse Assembly

Displaying program activity in inverse assembly can save many hours in test and debug.  No more time-consuming or error-prone conversions from hex because measurement listings appear just as you wrote them, making them easy to compare to source-code listings.

Preprocessor/Interface Modules

HP provides a complete line of microprocessor preprocessors that tailor the HP 1631A/D to specific microprocessors.  Preprocessor interface modules contain circuitry that properly formats data, and they provide connection via a microprocessor socket.  Software supplied with preprocessors performs inverse assembly for state displays in the selected microprocessor's mnemonics.

A bus preprocessor available for analyzing RS-232C/V.24, RS-449, and HP-IB data bus, and minicomputer interface modules are also available for use with HP logic analyzers.


Share this Product


More from this collection